Active temperature compensation for an accelerometer based angle measuring device

An angle measuring device using a high performance and very compact accelerometer provides a new and exciting method for producing highly compact and accurate angle measuring devices. Accelerometers are micro-machined and are able to measure acceleration to a very high accuracy. By using gravity as a reference these compact devices can also be used for measuring angles of rotation. The inherent problem with these devices is that their response characteristic changes with temperature which is detrimental to measurement accuracy. This paper describes an effective method to overcome this problem using a temperature sensor and intelligent software to compensate for this drift characteristic. In order to demonstrate the effectiveness of this work, experiments have been developed and conducted with the results and analysis provided at the end
of this paper for discussion.

Preparation and characterisation of new titanium based alloys for orthopaedic and dental applications

Various types of titanium alloys with high strength and low elastic modulus and, at the same time, vanadium and aluminium free have been developed as surgical biomaterials in recent years. Moreover, porous metals are promising hard tissue implants in orthopaedic and dentistry, where they mimic the porous structure and the low elastic modulus of natural bone. In the present study, new biocompatible Ti-based alloy foams with approximate relative densities of 0.4, in which Sn and Nb were added as alloying metals, were synthesised through powder metallurgy method.
The new alloys were prepared by mechanical alloying and subsequently sintered at high temperature using a vacuum furnace. The characteristics and the processability of the ball milled powders and the new porous titanium-based alloys were characterised by X-ray diffraction, optical
microscopy and scanning electron microscopy .The mechanical properties of the new titanium alloys were examined by Vickers microhardness measurements and compression testing.

Computer aided analysis of dental radiographic images

This paper is a result of a fruitful cooperation between the computer science and the dental diagnosis experiences. The study presents a new approach of applying computer algorithms to radiographic images of dental implantation used for bone regeneration. We focus here only on the contribution of the computer assistance to the clinical research as the periodontal therapy is beyond the scope of this paper. The proposed system is based on a pattern recognition approach, directed to recognize density changes in the intra-bony affected areas of patients. It comprises different modules with new algorithms specially designed to treat the patients’ radiographic images more accurately. The system includes digitizing, detecting the complicated region of interest (ROI), defining reference area to correct any projection discrepancy of the follow up images, and finally to extract the distinguishing features of the ROI as a basis for determining the rate of new bone density accumulation. This study is applied to two typical dental cases for a patient who received two different operations. The results are very encouraging and more accurate than traditional techniques reported before.

Low-flow oxygen therapy: selecting the right device

The authors provide and overview of oxygen therapy principles, describing the indications and care requirements of three low flow oxygen therapy devices and providing an algorithm for managing refractory hypoxaemia.

Wait no more : the use of private dental services by welfare recipients in Australia

Dental services in Australia are available both privately and publicly. However, access to public dental services, like access to public hospital services for non-urgent treatment, is subject to a considerable waiting period. Moreover, access to public dental services is restricted to certain categories of welfare beneficiaries who qualify for a health care card. Because of the waiting time for public treatment, there is a frequent call for more public dental resources. This paper addresses the issue of what the waiting time for public dental services represents. One view largely confirmed by our research is that state governments are using the waiting time as a way of trying to push more and more people into the private sector. We find that more and more health care card holders are using the
private sector for dental services.

Extending haptic device capability for 3D virtual grasping

This paper presents an investigation into the workspace constraints observed through the use of multiple single point haptic interfaces, which lead to the design of a novel grasping device that improves upon current commercial haptic interfaces. The presented device is desktop based, and has been designed to maximise the haptic workspace while offering the ability to grasp and manipulate virtual objects, which is a function that current commercial interfaces are limited in providing. The performance of the commercial haptic interface in producing sustained effective operation and increased workspace with the attached haptic gripper is evaluated, and the improvement of both has been determined.

A low-cost intelligent gas sensing device for military applications

The field of electronic noses and gas sensing has been developing rapidly since the introduction of the silicon based sensors. There are numerous systems that can detect and indicate the level of a specific gas. We introduce here a system that is low power, small and cheap enough to be used in mobile robotic platforms while still being accurate and reliable enough for confident use. The design is based around a small circuit board mounted in a plastic case with holes to allow the sensors to protrude through the top and allow the natural flow of gas evenly across them. The main control board consists of a microcontroller PCB with surface mount components for low cost and power consumption. The firmware of the device is based on an algorithm that uses an Artificial Neural Network (ANN) which receives input from an array of gas sensors. The various sensors feeding the ANN allow the microcontroller to determine the gas type and quantity. The Testing of the device involves the training of the ANN with a number of different target gases to determine the weightings for the ANN. Accuracy and reliability of the ANN is validated through testing in a specific gas filled environment.

Microprocessor-based insulin delivery device with amperometric glucose sensing

This paper details the design of a closed-loop insulin delivery device, consisting of a glucose sensing circuit, and a basic microprocessor-based syringe pump. The glucose sensing circuit contains the required components to interface with CGMS's glucose sensor assembly, while the syringe pump design uses microprocessor to allow flexible control over the pump driver. Instrumentation developed in this paper provides a ready reference to other researchers on the construction of a closed-loop insulin delivery apparatus with amperometric glucose sensor.

Australian dental policy reform and the use of dental therapists and hygienists

Oral diseases including dental caries and periodontal disease are among the most prevalent and costly diseases in Australia today. Around 5.4% of Australia’s health dollar is spent on dental services totalling around $2.6 billion, 84% of which are delivered through the private sector (AIHW 2001). The other 16% is spent providing public sector services in varied and inadequate ways. While disease rates among school children have declined significantly in the past 20 years the gains made among children are not flowing on to adult dentitions and our aging population will place increasing demands on an inadequate system into the future (AHMAC 2001). Around 50% of adults do not received regular care and this has implications for widening health inequalities as the greatest burden falls on lower income groups (AIHW DSRU 2001). The National Competition Policy agenda has initiated, Australia-wide, reviews of dental legislation applying to delivery of services by dentists, dental specialists, dental therapists and hygienists and dental technicians and prosthetists. The review of the Victorian Dentists Act 1972, was completed first in 1999, followed by the other Australian states with Queensland, the ACT and the Northern Territory still developing legislation. One of the objectives of the new Victorian Act is to ‘…promote access to dental care’. This study has grown out of the need to know more about how dental therapists and hygienists might be utilised to achieve this and the legislative frameworks that could enable such roles. This study used qualitative methods to explore dental health policy making associated with strategies that may increase access to dental care using dental therapists and hygienists. The study used a multiple case study design to critically examine the dental policy development process around the Review of the Dentists Act 1972 in Victoria; to assess legislative and regulatory dental policy reforms in other states in Australia and to conduct a comparative analysis of dental health policy as it relates to dental auxiliary practice internationally. Data collection has involved (I) semi-structured interviews with key participants and stakeholders in the policy development processes in Victoria, interstate and overseas, and (ii) analysis of documentary data sources. The study has taken a grounded theory approach whereby theoretical issues that emerged from the Victorian case study were further developed and challenged in the subsequent interstate and international case studies. A component of this study has required the development of indicators in regulatory models for dental hygienists and therapists that will increase access to dental care for the community. These indicators have been used to analyse regulation reform and the likely impacts in each setting. Despite evidence of need, evidence of the effectiveness and efficiency of dental therapists and hygienists, and the National Competition Policy agenda of increasing efficiency, the legislation reviews have mostly produces only minor changes. Results show that almost all Australian states have regulated dental therapists and hygienists in more prescriptive ways than they do dentists. The study has found that dental policy making is still dominated by the views of private practice dentists under elitist models that largely protect dentist authority, autonomy and sovereignty. The influence of dentist professional dominance has meant that governments have been reluctant to make sweeping changes. The study has demonstrated alternative models of regulation for dental therapists and hygienists, which would allow wider utilisation of their skills, more effective use of public sector funding, increased access to services and a grater focus on preventive care. In the light of theses outcomes, there is a need to continue to advocate for changes that will increase the public health focus of oral health care.

Grafts in myringoplasty : utilizing a silk fibroin scaffold as a novel device

Chronic perforations of the eardrum or tympanic membrane represent a significant source of morbidity worldwide. Myringoplasty is the operative repair of a perforated tympanic membrane and is a procedure commonly performed by otolaryngologists. Its purpose is to close the tympanic membrane, improve hearing and limit patient susceptibility to middle ear infections. The success rates of the different surgical techniques used to perform a myringoplasty, and the optimal graft materials to achieve complete closure and restore hearing, vary significantly in the literature. A number of autologous tissues, homografts and synthetic materials are described as graft options. With the advent and development of tissue engineering in the last decade, a number of biomaterials have been studied and attempts have been made to mimic biological functions with these materials. Fibroin, a core structural protein in silk from silkworms, has been widely studied with biomedical applications in mind. Several cell types, including keratinocytes, have grown on silk biomaterials, and scaffolds manufactured from silk have successfully been used in wound healing and for tissue engineering purposes. This review focuses on the current available grafts for myringoplasty and their limitations, and examines the biomechanical properties of silk, assessing the potential benefits of a silk fibroin scaffold as a novel device for use as a graft in myringoplasty surgery.

Theory of planned behaviour and implementation intentions in dental attendance

The thesis used a model of health behaviour to examine the predictors of dental attendance. Older respondents who had strong intentions, low perceived vulnerability, stable plans to attend, and were influenced by significant others were more likely to have attended the dentist for preventive care in the last 12 months. The portfolio concludes that attachment theory is a useful conceptual framework for enhancing our understanding of the antecedents and consequences of childhood sexual abuse.